Home > General > 0x800f022f

0x800f022f

SCARD_E_INSUFFICIENT_BUFFER 0x80100008 The data buffer to receive returned data is too small for the returned data. Support for troubleshooting and error reporting. SPAPI_E_INVALID_REFERENCE_STRING 0x800F021F The reference string supplied for this interface device is invalid. Sign in to make your opinion count.

MSSIPOTF_E_TABLE_CHECKSUM 0x8009700C A table checksum is incorrect. SPAPI_E_DI_DO_DEFAULT 0x800F020E The class installer has indicated that the default action should be performed for this installation request. SEC_E_KDC_CERT_EXPIRED 0x8009035A The domain controller certificate used for smartcard logon has expired. SEC_I_RENEGOTIATE 0x00090321 The context data must be renegotiated with the peer.

Please see the introduction of the HCL for more details in the section "Some notes about drivers:" www.backupexec.com/compatibility 0 Kudos Reply Re: Driver load failure 0x800F022F for SCSI\Sequential IBM ULTRIUM-HH6 D2DB NTE_BAD_PROVIDER 0x80090013 Invalid provider specified. APPX_E_INVALID_BLOCKMAP 0x80080205 The package's block map is invalid. CRYPT_E_ASN1_OVERFLOW 0x80093107 ASN1 buffer overflow.

Sign in Transcript Statistics 2,184 views 0 Like this video? SCARD_E_SERVER_TOO_BUSY 0x80100031 The Smart card resource manager is too busy to complete this operation. Category Education Licence Standard YouTube Licence Show more Show less Loading... CRYPT_E_UNKNOWN_ALGO 0x80091002 Unknown cryptographic algorithm.

SCARD_W_CARD_NOT_AUTHENTICATED 0x8010006F No PIN was presented to the smart card. SCARD_F_INTERNAL_ERROR 0x80100001 An internal consistency check failed. SCARD_E_NO_DIR 0x80100025 The supplied path does not represent a smart card directory. directory SCARD_W_WRONG_CHV 0x8010006B The card cannot be accessed because the wrong PIN was presented.

CERTSRV_E_SMIME_REQUIRED 0x80094805 The request is missing a required SMIME capabilities extension. The certification authority could not verify one or more key recovery certificates. APPX_E_INVALID_SIP_CLIENT_DATA 0x80080209 The SIP_SUBJECTINFO structure used to sign the package didn't contain the required data. APPX_E_MISSING_REQUIRED_FILE 0x80080203 The file is not a valid package because it is missing a manifest or block map, or missing a signature file when the code integrity file is present.

SCARD_E_DIR_NOT_FOUND 0x80100023 The identified directory does not exist in the smart card. SCARD_E_CERTIFICATE_UNAVAILABLE 0x8010002D The requested certificate could not be obtained. MSSIPOTF_E_BAD_FIRST_TABLE_PLACEMENT 0x80097008 First table does not appear after header information. Please contact your administrator.

CERTSRV_E_SUBJECT_EMAIL_REQUIRED 0x80094812 The EMail name is unavailable and cannot be added to the Subject or Subject Alternate name. To obtain support for a Microsoft product, go to http://support.microsoft.com. NTE_INVALID_PARAMETER 0x80090027 The parameter is incorrect. CRYPT_E_ASN1_UTF8 0x8009310E ASN1 bad unicode (UTF8).

CERT_E_WRONG_USAGE 0x800B0110 The certificate is not valid for the requested usage. SEC_E_STRONG_CRYPTO_NOT_SUPPORTED 0x8009033A The other end of the security negotiation is requires strong crypto but it is not supported on the local machine. CERTSRV_E_RENEWAL_BAD_PUBLIC_KEY 0x80094816 The certificate template requires renewal with the same public key, but the request uses a different public key. I'm worried that a solution that has been working for 2.5 years is not supported!!

Assessment of system state. SPAPI_E_DI_DONT_INSTALL 0x800F022B The class installer has denied the request to install or upgrade this device. SPAPI_E_BAD_SECTION_NAME_LINE 0x800F0001 A section name marker in the INF is not complete, or does not exist on a line by itself.

XENROLL_E_RESPONSE_KA_HASH_MISMATCH 0x80095004 There is a key archival hash mismatch between the request and the response.

SEC_E_SMARTCARD_CERT_REVOKED 0x80090351 The smartcard certificate used for authentication has been revoked. SCARD_E_NOT_READY 0x80100010 The reader or smart card is not ready to accept commands. XENROLL_E_CANNOT_ADD_ROOT_CERT 0x80095001 You cannot add the root CA certificate into your local store. This error mode can be managed by either a per-thread or per-process basis.

SEC_E_SMARTCARD_CERT_EXPIRED 0x80090355 The smartcard certificate used for authentication has expired. SEC_E_ENCRYPT_FAILURE 0x80090329 The specified data could not be encrypted. MSSIPOTF_E_STRUCTURE 0x80097018 Some kind of structural error. TRUST_E_COUNTER_SIGNER 0x80096003 One of the counter signatures was invalid.

Process Status API The process status application programming interface (PSAPI) is a helper library that makes it easier for you to obtain information about processes and device drivers. anmStudios 222,435 views 6:09 How to configure Disk Based Storage on Symantec Backup Exec 2012 - Duration: 2:21. View solution in original post 0 Kudos Reply 6 Replies Re: Driver load failure 0x800F022F for SCSI\Sequential IBM ULTRIUM-HH6 D2DB The third-party INF does not contain digital signature information. CERTSRV_E_BAD_TEMPLATE_VERSION 0x80094807 The request template version is newer than the supported template version.

MSSIPOTF_E_CANTGETOBJECT 0x80097002 Could not retrieve an object from the file.